Closing soon

Rotating Assembly - SS INT

Description: Hampton Roads Sanitation District is soliciting bids for a Rotating Assembly - SS INT procurement. The work requires the contractor to supply and deliver a Fairbanks Morse rotating assembly in accordance with the stated requirements, line-item descriptions, terms, and conditions. This is a competitive procurement solicitation, not a grant program, with bids due by September 8, 2026 at 2:30 PM Eastern time.

Buyer: Hampton Roads Sanitation District
SpecialDistrict · VA, US
Released: -
Closes: Sep 8, 2026(7 days left)

Files

Original attachments and procurement documents tied to this bid.

No files attached to this RFP.

Many agencies add documentation later or require FOIA requests. Starbridge can automatically retrieve these files for you.

Request File Retrieval

Key Contacts

Decision makers connected to this RFP from Hampton Roads Sanitation District.

Andrew F DrumhellerAccounting Manager

*******@************

+1 (***) ***-****

Stephen C. RodriguezChair, HRSD Commission

*******@************

+1 (***) ***-****

Leila Easmeil RiceChief Communications Officer

*******@************

+1 (***) ***-****

Jeffrey H. ScaranoChief Engineer

*******@************

+1 (***) ***-****

Similar active RFPs

Adjacent opportunities open for bidding right now.

DLA Maritime
FederalOH
Open
Jul 27, 2026
Closes
Sep 21, 2026
CB Rotating Assy *SOLE SOURCE* - New Cumberland (Request for Quotes)
Supply 16 Ea CB Rotating Assy, NSN 1HM 3120 014828716, P/N:4D09668-004.
City of Santa Cruz
CityCA
Closed
Jun 25, 2026
Closes
Aug 31, 2026
Sculptour Downtown Rotating Public Art Program Curator (Request For Proposal)
Seeking qualified curators or curatorial teams to submit proposals to lead the artistic direction, artist selection, and exhibition management for sculptour, an outdoor rotating sculpture exhibition program designed to enhance public space, support artists with highly visable gallery space, and engage the community.
City of Boone
CityIA
Open
Aug 6, 2026
Closes
Sep 4, 2026
Boone, IA 500,000 Gallon Spheroid (Industrial Road) Ext. Overcoat, Wet Int. Repaint, Dry Int. Partial Repaint, & Miscellaneous Repairs RFP
Work includes High-pressure water clean (5,000 to 10,000 psi), spot power tool clean to an SSPC-SP11 standard. Apply a three (3) coat epoxy urethane fluoropolymer system. Wet Interior: Abrasive blast clean to an SSPC-SP10 near-white metal standard. Apply a three (3) coat zinc epoxy system. apply a polyurethane caulk to the roof lap seams. The mechanical mixer is to be removed and reinstalled after the topcoat is cured. Dry Interior: Abrasive blast clean the entire top of the platform (including 1 ft. up the riser wall), the entire transition cone, the entire access tube, and spot coating failures throughout to an SSPC-SP6 commercial standard. Apply a three (3) coat epoxy system to the access tube and transition cone and a spot two (2) coat epoxy system to the rest of the prepared surfaces. Foundation: Repair grout. Repair spalls. Water clean and apply a two (2) coat epoxy system. Repairs: 1) Replace the bowl manway gasket. 2) Replace the wet interior roof hatch. 3) Replace the access tube roof hatch. 4) Install a hatch at the top platform. 5) Install handholds at the painter’s (bird) hatch. 6) Install deflector bars on the fill/draw pipe. 7) Replace the sample tap on the fill/draw pipe. 8) Remove the fill/draw pipe insulation for inspection. 9) As a contingency replace sections of the fill/draw pipe. 10) As a contingency weld pits on the fill/draw pipe. 11) Install an aluminum jacketing over the fill/draw pipe insulation. 12) Replace the mud valve. 13) Install a condensate drain line. 14) Install a flap gate on the overflow discharge. 15) Repair the hole in the overflow pipe. 16) Install a fall prevention device on the wet interior ladder. 17) Adjust the fall prevention devices. 18) Install a pressure vacuum vent. 19) Install cathodic clips and pressure fitting. 20) Install a roof handrail with a painter’s railing. 21) Weld a rigging lug on the transition cone. 22) Install a grate over the catch basin. 23) Install light fixtures in the riser and access tube. 24) Replace the dry interior light bulbs. 25) Install grounding rods for the structure.
DLA Aviation
FederalVA
Open
Jul 16, 2026
Closes
Sep 3, 2026
Shuttle Assembly
Provide shuttle assembly, NSN 7R-1720-011581698-VX, TDP VER 036, IAW REF NR 622559-4, QTY 52 Ea

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

City of Boone

CityIA

Open

Aug 6, 2026

Closes

Sep 4, 2026

Boone, IA 500,000 Gallon Spheroid (Industrial Road) Ext. Overcoat, Wet Int. Repaint, Dry Int. Partial Repaint, & Miscellaneous Repairs RFP

Work includes High-pressure water clean (5,000 to 10,000 psi), spot power tool clean to an SSPC-SP11 standard. Apply a three (3) coat epoxy urethane fluoropolymer system. Wet Interior: Abrasive blast clean to an SSPC-SP10 near-white metal standard. Apply a three (3) coat zinc epoxy system. apply a polyurethane caulk to the roof lap seams. The mechanical mixer is to be removed and reinstalled after the topcoat is cured. Dry Interior: Abrasive blast clean the entire top of the platform (including 1 ft. up the riser wall), the entire transition cone, the entire access tube, and spot coating failures throughout to an SSPC-SP6 commercial standard. Apply a three (3) coat epoxy system to the access tube and transition cone and a spot two (2) coat epoxy system to the rest of the prepared surfaces. Foundation: Repair grout. Repair spalls. Water clean and apply a two (2) coat epoxy system. Repairs: 1) Replace the bowl manway gasket. 2) Replace the wet interior roof hatch. 3) Replace the access tube roof hatch. 4) Install a hatch at the top platform. 5) Install handholds at the painter’s (bird) hatch. 6) Install deflector bars on the fill/draw pipe. 7) Replace the sample tap on the fill/draw pipe. 8) Remove the fill/draw pipe insulation for inspection. 9) As a contingency replace sections of the fill/draw pipe. 10) As a contingency weld pits on the fill/draw pipe. 11) Install an aluminum jacketing over the fill/draw pipe insulation. 12) Replace the mud valve. 13) Install a condensate drain line. 14) Install a flap gate on the overflow discharge. 15) Repair the hole in the overflow pipe. 16) Install a fall prevention device on the wet interior ladder. 17) Adjust the fall prevention devices. 18) Install a pressure vacuum vent. 19) Install cathodic clips and pressure fitting. 20) Install a roof handrail with a painter’s railing. 21) Weld a rigging lug on the transition cone. 22) Install a grate over the catch basin. 23) Install light fixtures in the riser and access tube. 24) Replace the dry interior light bulbs. 25) Install grounding rods for the structure.

Rotating Assembly - SS INT

Files

Key Contacts

Similar active RFPs

CB Rotating Assy SOLE SOURCE - New Cumberland (Request for Quotes)

Sculptour Downtown Rotating Public Art Program Curator (Request For Proposal)

Boone, IA 500,000 Gallon Spheroid (Industrial Road) Ext. Overcoat, Wet Int. Repaint, Dry Int. Partial Repaint, & Miscellaneous Repairs RFP

Shuttle Assembly

Similar active RFPs

CB Rotating Assy SOLE SOURCE - New Cumberland (Request for Quotes)

Sculptour Downtown Rotating Public Art Program Curator (Request For Proposal)

Boone, IA 500,000 Gallon Spheroid (Industrial Road) Ext. Overcoat, Wet Int. Repaint, Dry Int. Partial Repaint, & Miscellaneous Repairs RFP

Shuttle Assembly

Key Contacts