Description: Install an irrigation well pump and verify that the system meets operational requirements. The contractor shall furnish and install a complete 30-horsepower pumping plant, including 4" galvanized discharge piping and electrical wiring. The pump shall provide a discharge capacity of not less than 200 gallons per minute. The system shall be capable of operating against a total dynamic head of approx. 400 feet. The existing pump has been removed and is ready for installation of new pump. After installation, the contractor shall operate and test the well to confirm proper functionality and verify that the pump meets the required minimum flow rate of 200-gpm. The contractor shall run the irrigation reel using water supplied from the well to confirm adequate flow and pressure for irrigation operations.
StateAgency · MD, US
Original attachments and procurement documents tied to this bid.
Adjacent opportunities open for bidding right now.
Posted
Aug 31, 2026
Sep 10, 2026
The USDA Agricultural Research Service is soliciting quotations from small businesses for installation of a well pump in Edinburg, Texas, under solicitation 1232SA26Q1413. The acquisition is a total small-business set-aside under NAICS 238220, and all items must be 100% American-made. The active RFQ has quotations due September 10, 2026, at 6:30 AM CDT, and is not a grant program.
CityOH
Posted
Aug 24, 2026
Sep 21, 2026
The City of Middletown, Ohio, is soliciting proposals for comprehensive well and pump maintenance services for its municipal water-well system. The contract covers routine maintenance, cleaning, and optional repairs for twelve wells over a twelve-month period beginning January 1, 2027, with two optional one-year renewals. Sealed proposals are due September 21, 2026, at 2:00 PM, and the procurement requires prevailing-wage compliance, a bid bond, a performance bond, and specified service and performance information.
CityFL
Posted
Aug 18, 2026
Sep 23, 2026
Project consists of permitting and construction of a 2nd stormwater injection well at an existing stormwater pump station; installing well casing and well head piping with air valve in manhole; remove and replace two 24" isolating plug valves in new concrete vaults; new 24" spool and other connection piping, and surface restoration to include asphalt pavement, unimproved shoulder, and concrete sidewalk. Work includes all labor, materials, equipment, and services necessary to complete the facility as shown in the ITB construction plans. Major components of the work include site preparation with MOT; erosion and sediment control; well permitting and drilling; well head piping with air valve in concrete manhole; two new 24" plug valves in concrete vaults; connection piping, and all associated civil work required for a complete and operational stormwater pump station.
Wright Water And Sewer District
Special DistrictWY
Posted
Aug 28, 2026
Sep 8, 2026
Installation of the submersible pump, submersible motor, submersible motor cable, 5 1/2" drop pipe., 1 1/4" poly sounder tube, soft start monitor control panel, and all other appurtenances associated with the installation of the pumping equipment.
Decision makers connected to this RFP from Maryland Department of Agriculture.
