COG2026-05 TRAFFIC SIGNAL MAST ARM AND POLE REPAINTING

Close: Jan 25, 2026

Removing and replacing a damaged traffic signal pole. This project includes the following: The work consists of removing and replacing a damaged traffic signal pole at the intersection of Drive. The existing signal mast arm, signal heads, detection camera, preemption, streetlight arms and fixtures, signs and foundation will be reused. No onsite work to remove any of the components shall commence until the new traffic signal pole has been delivered. Setup proper, previously approved, traffic control to establish work area. Provide and maintain traffic control per the Virginia Work Area Protection Manual during all work activities. Carefully remove the existing mast arm, signal heads, detection camera, preemption, attached signage, streetlight arms and luminaires, and all associated wiring. Remove and dispose of the damaged traffic signal pole. Inspect and clean the existing foundation. Install the new traffic signal pole of the same height, finish (black powder-coated steel), and base-plate configuration to match the existing mast arm and foundation. Reinstall the existing mast arm, signal heads, detection camera, preemption, signage, streetlight arms and luminaires, on the new pole. New wiring shall be used from the signal pole terminal block to all equipment on the pole/mast arm. Reconnect all wiring or grounding as needed to ensure proper electrical operation for both the traffic signal and streetlight. Test and aim all signal heads and the streetlight to ensure correct operation and illumination pattern. Coordinate with City traffic signal staff for power shutdown and reactivation. Provide all labor, equipment, materials, and incidental items necessary for a complete and operational installation.

Close: Jan 26, 2026

The North Carolina Department of Transportation (NCDOT) issued an Invitation for Bid to procure Mast Arm Poles for Traffic Services Unit, Division 3, specifying itemized pole types and foundation/hardware per ITS project special provisions. Delivery is required within 250 consecutive calendar days after receipt of NCDOT-approved shop/submittal drawings, and deliveries will be to NCDOT Division of Highways in Castle Hayne, NC. Vendors must be registered in North Carolina's eVP, submit required HUB and financial attachments, meet insurance requirements, and are encouraged to utilize diverse subcontractors.

Close: Jan 21, 2026

Construction of adding an exclusive northbound left turn lane at the intersection and to construct the missing link of approx 1,250' of sidewalk. Project also includes the following improvements: 400 feet of guiderails; 420 LF of retaining wall; new signal equipment at Wimsatt road includes pole, mast arm, signal control box, signage and replacing loop detectors; traffic signal modification at the intersection including replacement of mast arm, signage and replacing loop detectors; underground detention pipes.