Description: Work includes approx. of 2,088 SF of construct continuously reinforced concrete pavement 6" thick with #4 reinforcement each way at 12" on center. Center reinforcement in the slab; 340 SF of construct 6" PCC driveway approach per SPPWC STD plan 110-2, type B; 2,649 SF of construct 4" PCC sidewalk per SPPWC STD plan 113-2; 4,300 SF of furnish and install turf sod; 36 LF of construct 6" concrete mow curb.
City · CA, US
Original attachments and procurement documents tied to this bid.
No files attached to this RFP.
Many agencies add documentation later or require FOIA requests. Starbridge can automatically retrieve these files for you.
Request File RetrievalDecision makers connected to this RFP from City of Fillmore.
Adjacent opportunities open for bidding right now.
CityAZ
Posted
Sep 1, 2026
Sep 21, 2026
Construction of water system improvements, including equipping two recently drilled water wells with pumps, wellheads, electrical equipment and connections, and piping connecting the wells to the existing water service pipelines and treatment plant. Water will be run through the treatment facility and distributed to local homes and businesses.
Big Bear Lake Department of Water and Power
Special DistrictCA
Posted
Aug 17, 2026
Sep 11, 2026
The Division Well No. 9 Equipping Project includes the following: Site grading, site concrete, and construction of a new 24’-0” x 17’-4” CMU building with a chemical storage room; All mechanical and electrical facilities to operate and control a 125 HP vertical turbine well pumping plant; CMU wall, automated cantilever gate system, and site paving.
Posted
Aug 31, 2026
Sep 10, 2026
The USDA Agricultural Research Service is soliciting quotations from small businesses for installation of a well pump in Edinburg, Texas, under solicitation 1232SA26Q1413. The acquisition is a total small-business set-aside under NAICS 238220, and all items must be 100% American-made. The active RFQ has quotations due September 10, 2026, at 6:30 AM CDT, and is not a grant program.
Maryland Department of Agriculture
State AgencyMD
Posted
Sep 1, 2026
Sep 10, 2026
Install an irrigation well pump and verify that the system meets operational requirements. The contractor shall furnish and install a complete 30-horsepower pumping plant, including 4" galvanized discharge piping and electrical wiring. The pump shall provide a discharge capacity of not less than 200 gallons per minute. The system shall be capable of operating against a total dynamic head of approx. 400 feet. The existing pump has been removed and is ready for installation of new pump. After installation, the contractor shall operate and test the well to confirm proper functionality and verify that the pump meets the required minimum flow rate of 200-gpm. The contractor shall run the irrigation reel using water supplied from the well to confirm adequate flow and pressure for irrigation operations.
