Closing soon

MNTC Construction Trades Building - Bid Package 04

Description: Bids are requested for Bid Package 04 of the MNTC Construction Trades Building at 4701 12th Ave NW in Norman, Oklahoma. The package includes masonry, roofing, glazing, interior finishes, fire suppression, electrical work, site paving, and fences and gates. Manhattan Construction Company is the listed project contact, and bids are due November 17, 2026, at noon.

Buyer: Moore Norman Technology Center
HigherEducation · OK, US
Released: -
Closes: Nov 17, 2026(4 days left)

RFP documents

Solicitation files and supporting documents for this bid.

RFP documents aren’t available here yet.

Our team can help you find the original solicitation documents.

Request File Retrieval

Key Contacts on this RFP

Decision makers connected to this RFP from Moore Norman Technology Center.

Jason BlackAdult Program Instructor, Aviation Maintenance Technology, General

*******@************

+1 (***) ***-****

Robert HensonAdult Program Instructor, Aviation Maintenance Technology, Powerplant

*******@************

Similar active RFPs

Adjacent opportunities open for bidding right now.

Massachusetts Department of Fire Services
State AgencyMA
Posted
Nov 1, 2021
Closes
Dec 30, 2032
DFSNF - Bid for Specialty Trades, #DFS-Trades-2022
The Massachusetts Department of Fire Services is soliciting specialty trade services (maintenance, repairs, inspections, and installations) at multiple locations including Stow, Springfield, and Bridgewater, MA. The contract term is up to ten years (initial two-year term with four optional two-year renewals) and the opportunity is administered through the Commonwealth of Massachusetts CommBuys procurement system.
The University Of Tennessee Health Science Center
Higher EducationTN
Posted
-
Closes
Dec 3, 2026
UTHSC College of Medicine and Interdisciplinary Building Bid Package 1 - Steel Mill Order SBC No. 540/013-04-2025
Flintco, LLC. has been selected as Construction Manager/General Contractor (CM/GC) for the following project: University of Tennessee UTHSC College of Medicine and Interdisciplinary Building Bid Package 1 - Steel Mill Order SBC No. 540/013-04-2025 Prequalified subcontractors are invited to submit complete bids for this project. Examine documents at Construction Manager's office. Obtain documents via distribution on Construction Manager's FTP site. Plans will be available to bidders November 11, 2026. Plan deposits are not required. All bidders, if not prequalified, must pre-qualify in accordance with Instructions to Bidders. Non-Discrimination policy applies. Work Packages: Work Package No. 05A - Steel Mill Order Bids Received At: Flintco's FTP Site Building Connected - Prequalified Only To request an invitation, contact Gene Mullins at memphisestimating@flintco.com Until: 2:00PM CST On: Thursday, December 3, 2026 Plan Deposit: None Required Construction Manager: Flintco, LLC 65 Germantown Court, Suite 101 Cordova, TN 38018 Contact: Gene Mullins gene.mullins@flintco.com Ph. 901.612.2794 Prequalification: All potential bidders must be prequalified with Flintco prior to bid submission. Interested bidders should reach out to Flintco directly about prequalification status. Licensing Requirements: Bidders shall be familiar with the Contractors Licensing Act of 1994, as currently amended, codified in Tennessee Code Annotated Sections 62-6-101, et seq. A contract will not be awarded that conflicts with state licensing laws. Pre-Bid Conference: November 19, 2026 at 10AM Meeting will be virtual. A Zoom link will be sent to prequalified bidders.
Taylorville Community Unit School District 3
School DistrictIL
Posted
Nov 8, 2026
Closes
Nov 24, 2026
Performing Arts Center Building Addition - Bid Package #2
Performing arts center building addition - bid package #2.
Calcasieu Parish School District
School DistrictLA
Posted
Oct 10, 2026
Closes
Nov 16, 2026
Bid#2027- Electrical Wiring Training Unit for Cte Electrical/ Construction Trades Instruction - (Request for Proposals) - *Re-Bid*
Provide electrical wiring training unit for CTE electrical/ construction trades instruction. Includes Electrical wiring training unit for CTE electrical/construction trades instruction, providing both horizontal and vertical wiring surfaces for hands-on installation of residential wiring circuits, including duplex and GFCI receptacles, switches, and lighting fixtures, using non-metallic (NM) cable and standard wiring devices and boxes. Unit to include circuit breakers/circuit protection devices for demonstrating overcurrent protection, and a low-voltage (24V) circuit testing mode with instructor key-lock control required before full 120 VAC energization. Unit to include an instructional manual or curriculum covering electrical wiring principles, National Electrical Code practices, and safety procedures. Minimum of a one-year warranty required on all equipment.

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

Similar active RFPs

Adjacent opportunities open for bidding right now.

Massachusetts Department of Fire Services

State AgencyMA

Posted

Nov 1, 2021

Closes

Dec 30, 2032

DFSNF - Bid for Specialty Trades, #DFS-Trades-2022

The Massachusetts Department of Fire Services is soliciting specialty trade services (maintenance, repairs, inspections, and installations) at multiple locations including Stow, Springfield, and Bridgewater, MA. The contract term is up to ten years (initial two-year term with four optional two-year renewals) and the opportunity is administered through the Commonwealth of Massachusetts CommBuys procurement system.

The University Of Tennessee Health Science Center

Higher EducationTN

Posted

Closes

Dec 3, 2026

UTHSC College of Medicine and Interdisciplinary Building Bid Package 1 - Steel Mill Order SBC No. 540/013-04-2025

Flintco, LLC. has been selected as Construction Manager/General Contractor (CM/GC) for the following project: University of Tennessee UTHSC College of Medicine and Interdisciplinary Building Bid Package 1 - Steel Mill Order SBC No. 540/013-04-2025 Prequalified subcontractors are invited to submit complete bids for this project. Examine documents at Construction Manager's office. Obtain documents via distribution on Construction Manager's FTP site. Plans will be available to bidders November 11, 2026. Plan deposits are not required. All bidders, if not prequalified, must pre-qualify in accordance with Instructions to Bidders. Non-Discrimination policy applies. Work Packages: Work Package No. 05A - Steel Mill Order Bids Received At: Flintco's FTP Site Building Connected - Prequalified Only To request an invitation, contact Gene Mullins at memphisestimating@flintco.com Until: 2:00PM CST On: Thursday, December 3, 2026 Plan Deposit: None Required Construction Manager: Flintco, LLC 65 Germantown Court, Suite 101 Cordova, TN 38018 Contact: Gene Mullins gene.mullins@flintco.com Ph. 901.612.2794 Prequalification: All potential bidders must be prequalified with Flintco prior to bid submission. Interested bidders should reach out to Flintco directly about prequalification status. Licensing Requirements: Bidders shall be familiar with the Contractors Licensing Act of 1994, as currently amended, codified in Tennessee Code Annotated Sections 62-6-101, et seq. A contract will not be awarded that conflicts with state licensing laws. Pre-Bid Conference: November 19, 2026 at 10AM Meeting will be virtual. A Zoom link will be sent to prequalified bidders.

Taylorville Community Unit School District 3

School DistrictIL

Posted

Nov 8, 2026

Closes

Nov 24, 2026

Performing Arts Center Building Addition - Bid Package #2

Performing arts center building addition - bid package #2.

Calcasieu Parish School District

School DistrictLA

Posted

Oct 10, 2026

Closes

Nov 16, 2026

Bid#2027- Electrical Wiring Training Unit for Cte Electrical/ Construction Trades Instruction - (Request for Proposals) - Re-Bid

Provide electrical wiring training unit for CTE electrical/ construction trades instruction. Includes Electrical wiring training unit for CTE electrical/construction trades instruction, providing both horizontal and vertical wiring surfaces for hands-on installation of residential wiring circuits, including duplex and GFCI receptacles, switches, and lighting fixtures, using non-metallic (NM) cable and standard wiring devices and boxes. Unit to include circuit breakers/circuit protection devices for demonstrating overcurrent protection, and a low-voltage (24V) circuit testing mode with instructor key-lock control required before full 120 VAC energization. Unit to include an instructional manual or curriculum covering electrical wiring principles, National Electrical Code practices, and safety procedures. Minimum of a one-year warranty required on all equipment.