Closing soon

Colibrium Additive Maintenance - M2 Additive Manufacturing 3D Printers RFP

Description: To provide semi-annual preventive maintenance and technical support for two (2) M2 Additive Manufacturing 3D Printers.

Buyer: Air Force Materiel Command
Federal · OH, US
Released: Aug 6, 2026
Closes: Aug 17, 2026(9 days left)

Files

Original attachments and procurement documents tied to this bid.

Federal RFP files are for Starbridge customers only.

You can request RFP files from all other buyer types for free on this site.

Key Contacts

Procurement and program contacts connected to Air Force Materiel Command.

Kathy-Anne SoderbergActing Chief Technology Officer, Air Force Research Laboratory

*******@************

+1 (***) ***-****

David E. Shahady(Acting) Director / Chief Operating Officer, Digital Capabilities Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Ohio

*******@************

+1 (***) ***-****

Robert McQuadeChief Information Officer for the HQ AFMC Digital Acceleration Task Force

*******@************

+1 (***) ***-****

Jadee PurdyChief Innovation Officer

*******@************

+1 (***) ***-****

Similar active RFPs

Adjacent opportunities open for bidding right now.

Department of Energy
FederalDC
Open
Apr 20, 2026
Closes
Sep 18, 2026
Anisotropic Additive Manufacturing Optimization Technology for Greater 3D Printing Efficiency
Idaho National Laboratory (INL) is soliciting expressions of interest from companies to license and commercialize its Anisotropic Additive Manufacturing Optimization Technology, which optimizes 3D printing parameters to improve material properties. This notice is a special notice intended to identify commercial partners for licensing rather than a grant or procurement for goods. The opportunity is active and open for responses through September 18, 2026, with no current attachments listed on the official record.
Defense Microelectronics Activity (DMEA)
FederalCA
Open
Aug 26, 2026
Closes
Sep 23, 2026
Additive Manufacturing for Flexible Electronics
The Defense Microelectronics Activity (DMEA) Year 2026 topic DME26BZ05-NV001 is a specific SBIR Phase I solicitation titled "Additive Manufacturing for Flexible Electronics." It concerns additive manufacturing (3D printing) for electronics packaging and flexible electronics, including RF electronics on flexible substrates and additive substrate or advanced-packaging methods. The official opportunity shows an open date of August 26, 2026 and a close date of September 23, 2026, so it is open on 2026-08-07.
Knoxville Metropolitan Airport Authority
Special DistrictTN
Open
Jul 10, 2026
Closes
Aug 13, 2026
New Fuel Farm Additive RFP
Construction of: base bid: new fuel farm additive alternate no. 1: electrical lighting for charlie ramp additive alternate no. 2: blast deflection system additive alternate no. 3: stainless steel fuel farm piping at mcghee tyson airport (tys). Base Bid Scope Of Work: 1. Buildings 2. fuel farm systems, 3. electrical systems 4. mechanical systems 5. fire alarm systems 6. landscape 7. IT, communications systems, and security systems (access control and surveillance) 8. wayfinding and signage 9. erosion and sediment control measures 10. fencing and gates 11. building pavements 12. Other Miscellaneous Items ADDITIVE ALTERNATE NO. 1: ELECTRICAL LIGHTING FOR CHARLIE RAMP The Work shall include but not limited to: - design of the final lighting system with light pole foundations, - erosion and sediment control measures, - construction safety and phasing measures, - temporary facilities, - earthwork installation of mast electrical lighting system (foundation, masts and lighting fixtures), - surveillance systems, IT and communications systems - site reclamation. ADDITIVE ALTERNATE NO. 2: BLAST DEFLECTION SYSTEM 1. The Work shall include but not limited to: - design of blast deflection system - erosion and sediment control measures, - construction safety and phasing measures, - temporary facilities, - earthwork, - installation of blast defection system - site reclamation ADDITIVE ALTERNATE NO. 3: STAINLESS STEEL FUEL FARM PIPING AND FITTINGS 1. Provide stainless steel piping, fittings, and general valves (ball valves, check valves, etc.) in place of coated carbon steel piping, fittings, and valves.
DLA Troop Support
FederalPA
Open
Aug 5, 2026
Closes
Aug 17, 2026
93--FILAMENT,ADDITIVE MANU
The Defense Logistics Agency, through DLA Troop Support, is soliciting electronic quotes for filament used in additive manufacturing. The RFQ seeks 46 units of NSN 9330016962752 for delivery to DLA Distribution Depot Oklahoma, with an approved source of 1GKB4 355-23101. Offers are due August 17, 2026, and the procurement is an active commercial solicitation rather than a grant program.

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

Knoxville Metropolitan Airport Authority

Special DistrictTN

Open

Jul 10, 2026

Closes

Aug 13, 2026

New Fuel Farm Additive RFP

Construction of: base bid: new fuel farm additive alternate no. 1: electrical lighting for charlie ramp additive alternate no. 2: blast deflection system additive alternate no. 3: stainless steel fuel farm piping at mcghee tyson airport (tys). Base Bid Scope Of Work: 1. Buildings 2. fuel farm systems, 3. electrical systems 4. mechanical systems 5. fire alarm systems 6. landscape 7. IT, communications systems, and security systems (access control and surveillance) 8. wayfinding and signage 9. erosion and sediment control measures 10. fencing and gates 11. building pavements 12. Other Miscellaneous Items ADDITIVE ALTERNATE NO. 1: ELECTRICAL LIGHTING FOR CHARLIE RAMP The Work shall include but not limited to: - design of the final lighting system with light pole foundations, - erosion and sediment control measures, - construction safety and phasing measures, - temporary facilities, - earthwork installation of mast electrical lighting system (foundation, masts and lighting fixtures), - surveillance systems, IT and communications systems - site reclamation. ADDITIVE ALTERNATE NO. 2: BLAST DEFLECTION SYSTEM 1. The Work shall include but not limited to: - design of blast deflection system - erosion and sediment control measures, - construction safety and phasing measures, - temporary facilities, - earthwork, - installation of blast defection system - site reclamation ADDITIVE ALTERNATE NO. 3: STAINLESS STEEL FUEL FARM PIPING AND FITTINGS 1. Provide stainless steel piping, fittings, and general valves (ball valves, check valves, etc.) in place of coated carbon steel piping, fittings, and valves.