Closed

(LRIP) Road Project RFP

Description: Prep & Paving: Prep Work to Cuff, Pulverize, Regrade and Roll, and Road Material was Completed November 2025; 70-Hot Mix Asphalt Pavement Travel Width: Per Lane 10 ft (20 ft); Butt Joints at Project Ends and Driveways as needed to allow for the Overlay to Match Adjacent Pavement; Overlay to Match Adjacent Pavement; Pave the Surface with DOT Spec Type LT Asphalt Mix Compacted to an Average Thickness of 1.50". (Total Thickness of Two Lifts 3"); Shouldering: -Furnish and Install Base for 2 ft Shoulders and Driveway Approaches.

Buyer: Village of Nelsonville
City · WI, US
Released: Jun 9, 2026
Closes: Jun 23, 2026(Closed)

Files

Original attachments and procurement documents tied to this bid.

No files attached to this RFP.

Many agencies add documentation later or require FOIA requests. Starbridge can automatically retrieve these files for you.

Request File Retrieval

Active alternatives to this closed RFP

These related opportunities are still open for bidding.

Town of Bone Lake
CityWI
Open
Jul 29, 2026
Closes
Aug 19, 2026
LRIP Project 19763 RFP
Work includes : 1.75" full 22' width hot mix resurface overlay of approximately 3,600'.
Town of Monroe
CityWI
Open
Aug 12, 2026
Closes
Aug 20, 2026
Petenwell Pines/LRIP Project RFP
Work consists of full depth pulverize roadway grade, water and compact. Haul, place water and compact 2" compacted with 1.25-base. Road width varies per road. Finish grade, water and compact. Pave 2"-thick mat variable ft wide using 4 lt 58-28s hot mix material.
Village of Winter
CityWI
Open
Aug 5, 2026
Closes
Aug 19, 2026
LRIP Grant Project 1 RFP
Pulverizing asphalt and resurfacing of asphalt measuring 24' x 369'. In addition to the LRIP 1 project, combining Project 2, to complete pulverizing and resurfacing. along Winter Co-op parking area measuring, 16' x 369', and the shoulder on the opposite side of the Hazel Street 16' x 369' to complete the entire Street repair.
Town of Emery
CityWI
Open
Aug 13, 2026
Closes
Aug 27, 2026
LRIP Entitlement Project - Chip Seal RFP
Chip sealing is over an existing blacktop road using 3/8" aggregate on the bottom coat topped with fa-2 granite chip using em-8 emulsion. Flex patching will be required prior to application of the chip seal. A 200 foot patch of asphalt coating approximately one inch thick needs to be applied on a short segment of failing asphalt. Road surface must be swept clean with a power brush prior to chip sealing and rolled with a rubber-tired roller and steel drum after application of the chip seal.

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts