Description: Decommission, remove, and dispose of existing motorized control cabinets (mcc) and associated wiring, cabling, and conduit, and install, test, and commission new mccs, supervisory control cabinets (scc) and associated wiring, cabling, and conduit, work. Install, test, and commission new data cabinets, field distribution panels (fdp), alternative field distribution panels (afdp), and/or network switches;install, test, and commission new fiber optic cabling between scc, new telecommunications equipment and communication rooms; andperform asbestos surveys and abate asbestos containing material (acm) identified by both contractor's surveys and existing surveys.
SpecialDistrict · NY, US
Original attachments and procurement documents tied to this bid.
No files attached to this RFP.
Many agencies add documentation later or require FOIA requests. Starbridge can automatically retrieve these files for you.
Request File RetrievalThese related opportunities are still open for bidding.
New York Metropolitan Transportation Authority
State AgencyNY
Posted
Aug 21, 2026
Oct 1, 2026
The Metropolitan Transportation Authority (MTA) is seeking a Project Management Consultant for fan plant component replacement and fiber optic cable installation.
CityAZ
Posted
Sep 17, 2026
Oct 19, 2026
Provide hot tank/clean 1 ea, magnaflux 1 ea, resurface heads 1 ea, replace seats 1 ea, valve job 1 ea, replace freeze plugs 1 ea, see outside link.
CityBC
Posted
-
Sep 22, 2026
The City of Abbotsford invites proposals for James Wastewater Treatment Plant – Digester #1 Repairs under RFP 1220-2026-4278. The work involves draining Digester 1, removing accumulated biosolids for treatment and disposal, cleaning and inspecting the digester, and carrying out repairs. The official portal identifies this as an open construction Request for Proposal, with bids closing on September 22, 2026 at 2:00:00 PM PDT.
Orange Water And Sewer Authority
Special DistrictNC
Posted
Aug 17, 2026
Sep 25, 2026
Secondary Clarifier #3 is an 85-foot diameter H40A HT Tow-Bro sludge collector clarifier, originally constructed in 1983. The interior clarifier mechanical equipment— including the center-drive mechanism, trusses, header assembly, manifold, influent well, surface skimmers, and scum beach—was replaced approx. five years ago as part of a capital improvement project. The scope of work includes: 1. Temporarily supporting the existing drive mechanism before disconnecting the center cage 2. Rebalancing the drive and replacing the grout between the top of the center pier and the bottom of the drive. 3. Heating up and bending the truss mounting bar back into its original position 4. Replacing manifold seals per manufacturer specifications 5. Mounting a new fluidizing vane to the bottom of the existing header by drilling new holes adjacent to the current ones 6. Installing additional counterweights per the manufacturer’s recommendations 7. Ensuring the drive is fully leveled and up to spec before connecting back to the main cage 8. Coordinating with equipment supplier vendor for certification that repairs were done correctly, and witness testing and performance testing for startup purposes.
Decision makers connected to this RFP from NYC Transit Bid Desk.
