Closing soon

Cat (Catapillar) C70rx or Equal Ride-one Sweeper With Ac Cabin (Request for Quote)

Description: Cat (catapillar) c70rx or equal ride-on sweeper with ac cabin.

Buyer: City of Glendale
City · CA, US
Released: Aug 27, 2026
Closes: Sep 8, 2026(7 days left)

Files

Original attachments and procurement documents tied to this bid.

No files attached to this RFP.

Many agencies add documentation later or require FOIA requests. Starbridge can automatically retrieve these files for you.

Request File Retrieval

Key Contacts

Decision makers connected to this RFP from City of Glendale.

Maria Theresa ClarkAccounting Manager

*******@************

+1 (***) ***-****

Mike FortneyActing Assistant Director of Community Development/Housing

*******@************

+1 (***) ***-****

Shea A Eccleston-BanwerADA Coordinator

*******@************

+1 (***) ***-****

Aram AdjemianAssistant City Clerk

*******@************

+1 (***) ***-****

Similar active RFPs

Adjacent opportunities open for bidding right now.

Savannah Hilton Head International Airport
Special DistrictGA
Open
Feb 6, 2026
Closes
Sep 18, 2026
One (1) Mini-Sweeper with Vacuum (Request for Quote) -*REBID*
Procurement of one (1) Mini-Sweeper with a vacuum.
City of Glendale
CityCA
Open
Aug 31, 2026
Closes
Sep 10, 2026
Toyota BZ or Equal (Request for Quote)
Provide Toyota BZ or Equal.
National Energy Technology Laboratory (NETL)
FederalPA
Open
Aug 18, 2026
Closes
Sep 3, 2026
IRA Funded - Brand-Name or Equal - (Request for Quote)
Fume Hood Dimensions: 72"w x 48"d x 100"h with 80"h entry doors: Construction features modular wall panels that are chemical and fire-resistant composite resin surface panels that are Class A and meet ASTM E-84 for a less than 25 flame spread.; Ceiling is fabricated of chemical and fire-resistant composite resin with molded-in 12" diameter exhaust collar.; Interior rear wall can maintain uniform airflow and reduce turbulence.; Horizontal slide door assemblies featuring aluminum framed tempered glass door panels on tracks 80" high. Doors must slide. At the base of each door panel is an air bypass inlet grill to allow air to enter the fume chamber when the doors are closed.; Light fixture, Class I Div I Groups ABCD; Class II Div II Groups FG 115/230v/60/50hz AC. ; All electrical components are U.L. listed. See attached file.
National Energy Technology Laboratory (NETL)
FederalPA
Open
Aug 31, 2026
Closes
Sep 2, 2026
IRA Funded - Brand-Name or Equal Request for Quote
The following Salient Characteristics are required for an equal product to be deemed technically acceptable. Seeking a device designed for grinding and polishing concrete specimens, natural stone, ceramic materials, and rock samples. Device must be able to securely hold 1”-3” diameter x 2”-3” length cube, cylinder, or core specimens on the table, with a grinding head that can be adjusted radially in both directions, either manually or automatically. Must be able to meet the standards required by ASTM D4543, ASTM C39, ISRM. Provide written communication or test documentation that demonstrates the equipment is capable of preparing specimens that meet ASTM D4543 dimensional tolerance requirements. Technical specifications: Automatic Grinding Input: 0.04 - 0.12 mm with lower feed rates (down to 0.01mm) for finer finishing; Grinding specs for specimens – must be able to run 1” -3” cylindrical and cubic samples; Degree of Finish: Ra 3.2 mm (rough finish) and Ra 1.6 mm (smooth finish); Parallelism: within +/-0.025mm for D=50mm sample (≈0.001rad); Perpendicularity: within 0.001rad from longitudinal axis of D=50mm sample; Cooling Devices: Receive water cooling.

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

Similar active RFPs

Adjacent opportunities open for bidding right now.

Savannah Hilton Head International Airport

Special DistrictGA

Open

Feb 6, 2026

Closes

Sep 18, 2026

One (1) Mini-Sweeper with Vacuum (Request for Quote) -REBID

Procurement of one (1) Mini-Sweeper with a vacuum.

City of Glendale

CityCA

Open

Aug 31, 2026

Closes

Sep 10, 2026

Toyota BZ or Equal (Request for Quote)

Provide Toyota BZ or Equal.

National Energy Technology Laboratory (NETL)

FederalPA

Open

Aug 18, 2026

Closes

Sep 3, 2026

IRA Funded - Brand-Name or Equal - (Request for Quote)

Fume Hood Dimensions: 72"w x 48"d x 100"h with 80"h entry doors: Construction features modular wall panels that are chemical and fire-resistant composite resin surface panels that are Class A and meet ASTM E-84 for a less than 25 flame spread.; Ceiling is fabricated of chemical and fire-resistant composite resin with molded-in 12" diameter exhaust collar.; Interior rear wall can maintain uniform airflow and reduce turbulence.; Horizontal slide door assemblies featuring aluminum framed tempered glass door panels on tracks 80" high. Doors must slide. At the base of each door panel is an air bypass inlet grill to allow air to enter the fume chamber when the doors are closed.; Light fixture, Class I Div I Groups ABCD; Class II Div II Groups FG 115/230v/60/50hz AC. ; All electrical components are U.L. listed. See attached file.

National Energy Technology Laboratory (NETL)

FederalPA

Open

Aug 31, 2026

Closes

Sep 2, 2026

IRA Funded - Brand-Name or Equal Request for Quote

The following Salient Characteristics are required for an equal product to be deemed technically acceptable. Seeking a device designed for grinding and polishing concrete specimens, natural stone, ceramic materials, and rock samples. Device must be able to securely hold 1”-3” diameter x 2”-3” length cube, cylinder, or core specimens on the table, with a grinding head that can be adjusted radially in both directions, either manually or automatically. Must be able to meet the standards required by ASTM D4543, ASTM C39, ISRM. Provide written communication or test documentation that demonstrates the equipment is capable of preparing specimens that meet ASTM D4543 dimensional tolerance requirements. Technical specifications: Automatic Grinding Input: 0.04 - 0.12 mm with lower feed rates (down to 0.01mm) for finer finishing; Grinding specs for specimens – must be able to run 1” -3” cylindrical and cubic samples; Degree of Finish: Ra 3.2 mm (rough finish) and Ra 1.6 mm (smooth finish); Parallelism: within +/-0.025mm for D=50mm sample (≈0.001rad); Perpendicularity: within 0.001rad from longitudinal axis of D=50mm sample; Cooling Devices: Receive water cooling.