Water Tower Painting and Miscellaneous Repair Project (Village Greens) RFP

Description: The structure is a 1,500,000 gallon fluted column elevated water storage tank with a high-water level of 85.5 ft. and a diameter of 86 ft. The work includes: Exterior: Abrasive blast clean to an SSPC-SP6 commercial standard within containment. Apply a four (4) coat zinc epoxy urethane fluoropolymer system. Wet Interior: Abrasive blast clean to an SSPC-SP10 near-white metal standard. Apply a three (3) coat zinc epoxy system. Apply a polyurethane caulk to the roof lap seams. Dry Interior: Abrasive blast clean the spot coating failures throughout to an SSPC-SP6 commercial standard. Apply a spot two (2) coat epoxy system to the prepared surfaces. Pit Piping: Abrasive blast clean to an SSPC-SP6 commercial standard. Apply a two (2) coat epoxy system. Foundation: Abrasive blast clean and apply a two (2) coat epoxy system. Splash Pad: Install a concrete splash pad at the overflow pipe discharge. Cathodic Protection: Install an impressed current cathodic protection system. Repairs: 1)Replace the bowl manway gasket. 2)Install a gasket on the bolted painter’s hatch. 3)Install deflector bars on the fill/draw pipe. 4)Replace the sample tap on the fill/draw pipe. 5)Replace the mud valve. 6)Overflow discharge modification. 7)Install a wet interior ladder. 8)Install a swing gate at the top platform opening. 9)Install a pressure vacuum vent and remove the existing vents. 10)Install a roof handrail with a painter’s railing. 11)Relocate the aviation light to a free-standing mount. 12)Repair damaged electrical junction box. 13)Replace the dry interior light bulbs. 14)Install grounding rods for the structure. 15)Install radar monitoring system. 16)Replace the overhead door.