New COPMA brand knuckle boom model 198.3 with the following specifications: Model description: “19” ton lift, “3” hydraulic extensions on main boom. Hydraulic reach of 33’-8, with 3,460 lb capacity at end, main boom at 15 degrees, not max. reach. Minus the weight of hydraulic rotator, spreader bar and any other items suspended from boom. Please refer to applicable load charts. Full hydraulic rotation system using rack and pinion system, 420 degrees rotation, fully greaseable rotation system. Overlap area will be set over the front of truck to have full access over rear. All areas around the truck are accessible. Overlap could be set over the rear while ordering the unit if requested. Hydraulic extending outrigger beams with 21’-4” extension, hydraulic up/down legs, also includes pilot operated check valves (safety valves in case of hose failure), with controls on each side of base. Non-tilting legs. Charts for various short rigging operations included. LED lights (amber) wrap around on each outrigger leg, Lights turned on with crane power. (2) Large 24” PVC outrigger pads (& storage area under bed/crane per space). Hydraulic oil tank with site and temperature gauge tank mounted on crane base. High pressure filter on crane base and a return oil filter (before oil goes back to tank). Hydraulic oil cooler, 12v electric, thermostatically controlled, separate electric circuit. All crane control levers with electric Danfoss brand proportional control valve installed on one side of crane base. Back-up for radio remote control. Fully proportional radio remote control system for all boom functions with HI/LOW range, E-Stop, (2) re-chargeable batteries, (1) 12v battery charger installed in truck cab. Back-up cord is included for programming. Load hook with safety latch at boom tip mounted on hydraulic rotator with connecting links. This crane would have (2) hoses going to the boom tip to power a continuous turn hydraulic rotating load hook. This hydraulic rotating hook would be controlled on the radio remote handset (fully proportional) in addition to control levers on the crane base.
