FederalIL
Posted
Nov 10, 2026
Nov 25, 2026
Grease Traps Maintenance - Dover AFB - (Request for Quotation)
Requirement for grease trap maintenance services. Remove waste built up from grease traps or pit walls and all associated equipment within the pit with water pressure washer equipment. Flush down with water and pump out remaining residue as required by the unique configuration of each grease trap. Residual or recharged water must be higher than lower inlets. Clear any obstructions in inlet/outlet pipes to ensure unrestricted flow. Transport all materials from grease traps to an approved off-base storage facility. The contractor shall clean the surface area around the grease trap to be free of grease and food particles. The contractor shall correct any spills, splashes, or damages caused by the contractor’s operation. Spillage onto floors and ground will be cleaned by the contractor. The contractor shall provide an inspection report/service ticket to the cor after work is complete and prior to leaving the base. The service ticket shall have the company letterhead along with facility number, condition of the trap, estimated gallons pumped, and any structural condition or safety issues.
