Closed

E-7 Wedgetail Aircraft Simulator Capability Assessment RFP

Description: The development and delivery of one Operational Flight Training (OFT) Device, two Virtual Maintenance Trainers (VMT) for hands-on training and a Training System Support Center. The E-7 Wedgetail aircraft, set to replace the E-3 in future operations, is based on a commercial Boeing 737 airframe.

Buyer: Air Force Materiel Command
Federal · OH, US
Released: Aug 20, 2026
Closes: Aug 27, 2026(Closed)

Files

Original attachments and procurement documents tied to this bid.

Federal RFP files are for Starbridge customers only.

You can request RFP files from all other buyer types for free on this site.

Active alternatives to this closed RFP

These related opportunities are still open for bidding.

Department of the Air Force
FederalDC
Posted
Sep 4, 2026
Closes
Sep 15, 2026
E-7 Wedgetail Request for Information
This active Sources Sought notice seeks information from qualified contractors capable of developing, delivering, and supporting two Virtual Maintenance Trainers and associated training support for the U.S. Air Force E-7 Wedgetail aircraft. The effort includes systems engineering, device upgrades, logistics support, instructional services, data delivery, and compliance with security and cybersecurity requirements at Tinker Air Force Base. Responses are for market research and capability assessment only, are not a formal request for proposals, and do not guarantee a contract award.
Northwest Louisiana Technical College
Higher EducationLA
Posted
Sep 1, 2026
Closes
Sep 23, 2026
Driver Training Simulator RFP
Provide driver training simulator. Includes 1 EA of manual transmission vehicles package eaton oem 4-18 speed #UT09000 or equal; 1 EA of D-box gen3 motion base for mobile trailer series 8 #UT09874 or equal.
Federal Aviation Administration
FederalDC
Posted
Aug 21, 2026
Closes
Sep 21, 2026
REMOTE MONITORING and MAINTENANCE CAPABILITY (RMMC) RFP
The Federal Aviation Administration (FAA), under the U.S. Department of Transportation, posted this active federal contract-opportunity Sources Sought notice—not a grant—to investigate Remote Monitoring and Maintenance Capability (RMMC) systems for PAPI, REIL, ALSF-2, and MALSR Visual Guidance Lighting Systems. It seeks industry information on existing or innovative interfaces between those lighting systems and the FAA's Conversion Appliance Service System (CASS), which converts TDM signals to IP for transmission to the Remote Monitoring and Logging System (RMLS), including support for up to 30 analog or digital data points per system. The SAM.gov page lists four public attachments but no direct attachment URLs, and responses are due September 21, 2026 at 5:00 PM EDT.
Air Force Life Cycle Management Center
FederalOH
Posted
Aug 27, 2026
Closes
Oct 27, 2026
Robotic Sheet Metal Forming Capability RFP
Provide robotic sheet metal forming capability conducting market research analysis to identify existing solutions for an on-demand, dieless robotic sheet metal forming capability. This capability is intended to produce structural components, brackets, panels, skin sections, and spare parts for support equipment, and aircraft at depot, maintenance, or factory-level facilities. Traditional manufacturing of sheet metal parts relies on heavy, expensive tooling, dies, and presses that require long lead times, high upfront costs, and physical storage

Key Contacts

Decision makers connected to this RFP from Air Force Materiel Command.

Kathy-Anne SoderbergActing Chief Technology Officer, Air Force Research Laboratory

*******@************

+1 (***) ***-****

David E. Shahady(Acting) Director / Chief Operating Officer, Digital Capabilities Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Ohio

*******@************

+1 (***) ***-****

Robert McQuadeChief Information Officer for the HQ AFMC Digital Acceleration Task Force

*******@************

+1 (***) ***-****

Jadee PurdyChief Innovation Officer

*******@************

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

Active alternatives to this closed RFP

These related opportunities are still open for bidding.

Department of the Air Force

FederalDC

Posted

Sep 4, 2026

Closes

Sep 15, 2026

E-7 Wedgetail Request for Information

This active Sources Sought notice seeks information from qualified contractors capable of developing, delivering, and supporting two Virtual Maintenance Trainers and associated training support for the U.S. Air Force E-7 Wedgetail aircraft. The effort includes systems engineering, device upgrades, logistics support, instructional services, data delivery, and compliance with security and cybersecurity requirements at Tinker Air Force Base. Responses are for market research and capability assessment only, are not a formal request for proposals, and do not guarantee a contract award.

Northwest Louisiana Technical College

Higher EducationLA

Posted

Sep 1, 2026

Closes

Sep 23, 2026

Driver Training Simulator RFP

Provide driver training simulator. Includes 1 EA of manual transmission vehicles package eaton oem 4-18 speed #UT09000 or equal; 1 EA of D-box gen3 motion base for mobile trailer series 8 #UT09874 or equal.

Federal Aviation Administration

FederalDC

Posted

Aug 21, 2026

Closes

Sep 21, 2026

REMOTE MONITORING and MAINTENANCE CAPABILITY (RMMC) RFP

The Federal Aviation Administration (FAA), under the U.S. Department of Transportation, posted this active federal contract-opportunity Sources Sought notice—not a grant—to investigate Remote Monitoring and Maintenance Capability (RMMC) systems for PAPI, REIL, ALSF-2, and MALSR Visual Guidance Lighting Systems. It seeks industry information on existing or innovative interfaces between those lighting systems and the FAA's Conversion Appliance Service System (CASS), which converts TDM signals to IP for transmission to the Remote Monitoring and Logging System (RMLS), including support for up to 30 analog or digital data points per system. The SAM.gov page lists four public attachments but no direct attachment URLs, and responses are due September 21, 2026 at 5:00 PM EDT.

Air Force Life Cycle Management Center

FederalOH

Posted

Aug 27, 2026

Closes

Oct 27, 2026

Robotic Sheet Metal Forming Capability RFP

Provide robotic sheet metal forming capability conducting market research analysis to identify existing solutions for an on-demand, dieless robotic sheet metal forming capability. This capability is intended to produce structural components, brackets, panels, skin sections, and spare parts for support equipment, and aircraft at depot, maintenance, or factory-level facilities. Traditional manufacturing of sheet metal parts relies on heavy, expensive tooling, dies, and presses that require long lead times, high upfront costs, and physical storage