Closed

Differential Gearbo - Tracy (RFQ)

Description: Differential gearbo, NSN 2520015598867, Qty 1.

Buyer: DLA Land
Federal · OH, US
Released: Jun 7, 2026
Closes: Jun 18, 2026(Closed)

Files

Original attachments and procurement documents tied to this bid.

Federal RFP files are for Starbridge customers only.

You can request RFP files from all other buyer types for free on this site.

Active alternatives to this closed RFP

These related opportunities are still open for bidding.

County of Riverside
CountyCA
Open
Jul 23, 2026
Closes
Aug 27, 2026
DIFFERENTIAL RESPONSE (DR) SERVICES
The County of Riverside is seeking proposals from qualified firms to provide Differential Response (DR) Services for the Department of Public Social Services’ Children and Family Services program. The selected contractor will provide flexible, individualized services including assessment, case planning, service linkage, evidence-based practices, and outcome measurement for families with low to moderate risk. The solicitation anticipates approximately 300–1,000 referrals annually, offers a one-year contract with possible renewal, and remains open through August 27, 2026.
DLA Land
FederalOH
Open
Aug 9, 2026
Closes
Aug 24, 2026
Differential, Drivin - SPE7LX26U9349 (Request for Quotes)
Differential, drivin, NSN 2520015763048, Qty 1.
DLA Land
FederalOH
Open
Aug 6, 2026
Closes
Aug 20, 2026
Gage, Differential - New Cumberland (Request for Quotes)
Gage, differential, NSN 6685016228696, Qty 58.
National Energy Technology Laboratory (NETL)
FederalPA
Open
Jul 30, 2026
Closes
Aug 18, 2026
Thermogravimetry-Differential Scanning Calorim - (Request for Quote)
Mettler Toledo Laboratory Thermal Gravimetric Analyzer (TGA) - Qty 1: The TGA system must have a differential scanning calorimetry (DSC) function. TGA must include an option for an automatic gas accessory controlled by the software to regulate both the flow and switching of up to three purge gases during an experiment. The TGA system must have a temperature range from room temperature to 1100 °C. TGA must include two thermocouples in direct contact with the sample crucible to simultaneously measure heat flow (DSC) information about the sample and mass change. The TGA system must have a heating rate of 0.02 °C/min, 150 °C/min, or 250 °C/min, with a temperature resolution of 0.0001 °C. The TGA system must have a cooling rate of 0.02 °C/min or 50 °C/min. TGA must have a true parallel guided internal balance with a minimum sample capacity of 5000 mg and a continuous resolution of 1.0 microgram without range switching. The TGA system should have large mass-loss features with a sample capacity of more than 1 g, high‑precision mass sensitivity at the 1 g scale, and simultaneous differential scanning calorimetry (DSC) on the same sample load. The balance must have internal calibration ring weights to allow user calibration without external weights. The TGA system should be able to handle crucible sizes ranging from 20-150uL standard. The TGA should allow for future modification to accommodate crucibles up to 900uL. The TGA software must be comparable between multiple TGA instruments installed at the Pittsburgh site. See attached file.

Key Contacts

Procurement and program contacts connected to DLA Land.

Cathy ContrerasAcquisition Executive

*******@************

+1 (***) ***-****

Mark A RushActing Chief, Electronic Components Branch

*******@************

+1 (***) ***-****

Daniele J. KurzeActing Executive Director of Acquisitions, DLA Weapons Support

*******@************

+1 (***) ***-****

Marco SchmigotzkiChief of Police

*******@************

+1 (***) ***-****

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

National Energy Technology Laboratory (NETL)

FederalPA

Open

Jul 30, 2026

Closes

Aug 18, 2026

Thermogravimetry-Differential Scanning Calorim - (Request for Quote)

Mettler Toledo Laboratory Thermal Gravimetric Analyzer (TGA) - Qty 1: The TGA system must have a differential scanning calorimetry (DSC) function. TGA must include an option for an automatic gas accessory controlled by the software to regulate both the flow and switching of up to three purge gases during an experiment. The TGA system must have a temperature range from room temperature to 1100 °C. TGA must include two thermocouples in direct contact with the sample crucible to simultaneously measure heat flow (DSC) information about the sample and mass change. The TGA system must have a heating rate of 0.02 °C/min, 150 °C/min, or 250 °C/min, with a temperature resolution of 0.0001 °C. The TGA system must have a cooling rate of 0.02 °C/min or 50 °C/min. TGA must have a true parallel guided internal balance with a minimum sample capacity of 5000 mg and a continuous resolution of 1.0 microgram without range switching. The TGA system should have large mass-loss features with a sample capacity of more than 1 g, high‑precision mass sensitivity at the 1 g scale, and simultaneous differential scanning calorimetry (DSC) on the same sample load. The balance must have internal calibration ring weights to allow user calibration without external weights. The TGA system should be able to handle crucible sizes ranging from 20-150uL standard. The TGA should allow for future modification to accommodate crucibles up to 900uL. The TGA software must be comparable between multiple TGA instruments installed at the Pittsburgh site. See attached file.