Closing soon

3D Laser Scanner RFP

Description: The US Geological Survey (USGS) intends to award a purchase order to RieglUSA in Winter Garden, Florida for a 3D laser scanner with the following Salient Characteristics: Required Salient Characteristics: Range and Data Collection Speed: Provides a range of 900 meters at 20% reflectivity at 300 kHz. Provides a range of 400 meters at 20% reflectivity at 1,200 kHz. Provides a range of 360 meters at 20% reflectivity at 1,200 kHz. See outside link.

Buyer: Indian Education Acquisition Office
Federal · NM, US
Released: Sep 15, 2026
Closes: Sep 21, 2026(4 days left)

Files

Original attachments and procurement documents tied to this bid.

Federal RFP files are for Starbridge customers only.

You can request RFP files from all other buyer types for free on this site.

Key Contacts

Decision makers connected to this RFP from Indian Education Acquisition Office.

Dawn SekayumptewaSupervisory Contracting Officer, Construction and A&E

*******@************

+1 (***) ***-****

Darren NutterSupervisory Contracting Officer, K-12 Goods & Services

*******@************

+1 (***) ***-****

Similar active RFPs

Adjacent opportunities open for bidding right now.

U.S. Geological Survey
FederalVA
Posted
Sep 15, 2026
Closes
Sep 21, 2026
66--3D LASER SCANNER
This presolicitation is a notice of intent by the U.S. Geological Survey to procure a 3D laser scanner from a single source, identified as RieglUSA in Winter Garden, Florida. The scanner must meet detailed requirements for range, accuracy, multiple returns, field of view, GNSS integration, environmental protection, storage, accessories, software, and training. Responses or inquiries are due by September 21, 2026, at 9:00 a.m. Eastern Daylight Time, and the notice states that no formal solicitation will be issued.
W6QM Micc-Ft DRUM
FederalNY
Posted
Sep 10, 2026
Closes
Sep 17, 2026
3D Printer RFP
Multi-Material Full-Color 3D Printer System. 001 Item: Multi-Material Full-Color3D Printer System Brand Name: Stratasys(or Equal) Part Number: J826 Prime(or Equal) Salient Characteristics: 1. Build Volume & Print Engine Technology: PhotopolymerMulti-Jetting / PolyJet or equivalent multi-material droplet jetting technology. BuildVolume: Minimum build envelope of at least 255 mm (X) x 252 mm (Y) x 200 mm (Z)[10.0 x 9.9 x 7.9 inches]. Layer Thickness: High-precision mode capable of layer resolution down to at least 14–18 microns (0.00055–0.0007 in). Print Speed Modes: Must include multiple selectable build modes, including a dedicated High-Speed / Draft modefor rapid prototyping. 2. Color & Material Capabilities Simultaneous Materials: Must support concurrent printing of at least 7 distinct base resin materials simultaneously in a single build. Full-Color Capability: Must produce full-color parts with a gamut exceeding 500,000 distinguishable colors. Color Validation: Integrated color matching support with PANTONE® validation or equivalent industry color standard calibration. Rigid Materials:Must support high-opacity rigid materials (white, black, cyan, magenta, yellow, and clear).Flexible / Elastomeric: Must support flexible photo polymer materials capable of Shore Ahardness ranges from Shore 30A to Shore 95A. Optical Clarity: Must support optically clear / transparent material formulation for visual fluidic/window prototyping. Support Material: Soluble and/or water-jet removable support material designed to protect delicate internal cavities without damaging part geometry. 3. Software, Ancillary Equipment &Facility Integration CAD/Software Workflow: Direct native CAD file import (e.g., STEP,STL, IGES, SolidWorks) without manual mesh conversion; includes part orientation and 1 each; build time estimation. Air Filtration: Dedicated external or integrated air extraction / air filtration unit to capture VOCs and particulate emissions during operation. Power Protection: Compatible dedicated Uninterruptible Power Supply (UPS) matched to equipment power load to prevent print failure from minor outages. Material Handling:High-capacity automated material feed cabinet supporting continuous printing with auto-switching between cartridges. 4. Delivery, Training & Service Requirements Installation &Setup: On-site vendor uncrating, physical installation, calibration, and operational verification at the delivery installation. Operator Training: Dedicated on-site basic and advanced operator and maintenance training for government personnel. Warranty &Maintenance: Minimum 24-month comprehensive parts, labor, print head coverage, and priority technical support.
W6QM Micc-Ft DRUM
FederalNY
Posted
-
Closes
Sep 17, 2026
3D Foot Scanner for Boot Fitting
3D Foot Scanner for Boot Fitting is a federal supply solicitation issued by the U.S. Army’s Mission Installation Contracting Command at Fort Drum. It seeks a 3D foot scanner to support boot fitting. The opportunity remains open as of 2026-09-16, with responses due on September 17, 2026, and it is not identified as a grant program.
W6QM Micc-Ft DRUM
FederalNY
Posted
Sep 15, 2026
Closes
Sep 17, 2026
3D Foot Scanner for Boot Fitting
The U.S. Army is seeking ten commercial off-the-shelf, brand-agnostic automated 3D digital footwear fitting systems, along with annual technical service, for Initial Entry Training clothing issue points. Each system must perform non-invasive 3D scanning, capture specified foot measurements within 20 seconds, and convert scan data into military combat-boot sizing across standard widths. The procurement is a total small-business set-aside, with performance at Fort Jackson, South Carolina, and offers due September 17, 2026, at 6:00 PM EDT.

See your top accountsScan your site in seconds. Starbridge identifies your ICP and surfaces emerging opportunities from board meetings, job changes, new grants, contract expirations, RFPs, and more.

See your top 10 accounts

Similar active RFPs

Adjacent opportunities open for bidding right now.

U.S. Geological Survey

FederalVA

Posted

Sep 15, 2026

Closes

Sep 21, 2026

66--3D LASER SCANNER

This presolicitation is a notice of intent by the U.S. Geological Survey to procure a 3D laser scanner from a single source, identified as RieglUSA in Winter Garden, Florida. The scanner must meet detailed requirements for range, accuracy, multiple returns, field of view, GNSS integration, environmental protection, storage, accessories, software, and training. Responses or inquiries are due by September 21, 2026, at 9:00 a.m. Eastern Daylight Time, and the notice states that no formal solicitation will be issued.

W6QM Micc-Ft DRUM

FederalNY

Posted

Sep 10, 2026

Closes

Sep 17, 2026

3D Printer RFP

Multi-Material Full-Color 3D Printer System. 001 Item: Multi-Material Full-Color3D Printer System Brand Name: Stratasys(or Equal) Part Number: J826 Prime(or Equal) Salient Characteristics: 1. Build Volume & Print Engine Technology: PhotopolymerMulti-Jetting / PolyJet or equivalent multi-material droplet jetting technology. BuildVolume: Minimum build envelope of at least 255 mm (X) x 252 mm (Y) x 200 mm (Z)[10.0 x 9.9 x 7.9 inches]. Layer Thickness: High-precision mode capable of layer resolution down to at least 14–18 microns (0.00055–0.0007 in). Print Speed Modes: Must include multiple selectable build modes, including a dedicated High-Speed / Draft modefor rapid prototyping. 2. Color & Material Capabilities Simultaneous Materials: Must support concurrent printing of at least 7 distinct base resin materials simultaneously in a single build. Full-Color Capability: Must produce full-color parts with a gamut exceeding 500,000 distinguishable colors. Color Validation: Integrated color matching support with PANTONE® validation or equivalent industry color standard calibration. Rigid Materials:Must support high-opacity rigid materials (white, black, cyan, magenta, yellow, and clear).Flexible / Elastomeric: Must support flexible photo polymer materials capable of Shore Ahardness ranges from Shore 30A to Shore 95A. Optical Clarity: Must support optically clear / transparent material formulation for visual fluidic/window prototyping. Support Material: Soluble and/or water-jet removable support material designed to protect delicate internal cavities without damaging part geometry. 3. Software, Ancillary Equipment &Facility Integration CAD/Software Workflow: Direct native CAD file import (e.g., STEP,STL, IGES, SolidWorks) without manual mesh conversion; includes part orientation and 1 each; build time estimation. Air Filtration: Dedicated external or integrated air extraction / air filtration unit to capture VOCs and particulate emissions during operation. Power Protection: Compatible dedicated Uninterruptible Power Supply (UPS) matched to equipment power load to prevent print failure from minor outages. Material Handling:High-capacity automated material feed cabinet supporting continuous printing with auto-switching between cartridges. 4. Delivery, Training & Service Requirements Installation &Setup: On-site vendor uncrating, physical installation, calibration, and operational verification at the delivery installation. Operator Training: Dedicated on-site basic and advanced operator and maintenance training for government personnel. Warranty &Maintenance: Minimum 24-month comprehensive parts, labor, print head coverage, and priority technical support.

W6QM Micc-Ft DRUM

FederalNY

Posted

Closes

Sep 17, 2026

3D Foot Scanner for Boot Fitting

3D Foot Scanner for Boot Fitting is a federal supply solicitation issued by the U.S. Army’s Mission Installation Contracting Command at Fort Drum. It seeks a 3D foot scanner to support boot fitting. The opportunity remains open as of 2026-09-16, with responses due on September 17, 2026, and it is not identified as a grant program.

W6QM Micc-Ft DRUM

FederalNY

Posted

Sep 15, 2026

Closes

Sep 17, 2026

3D Foot Scanner for Boot Fitting

The U.S. Army is seeking ten commercial off-the-shelf, brand-agnostic automated 3D digital footwear fitting systems, along with annual technical service, for Initial Entry Training clothing issue points. Each system must perform non-invasive 3D scanning, capture specified foot measurements within 20 seconds, and convert scan data into military combat-boot sizing across standard widths. The procurement is a total small-business set-aside, with performance at Fort Jackson, South Carolina, and offers due September 17, 2026, at 6:00 PM EDT.