Village of Elkhart Lake

Village of Elkhart Lake

Close: Jun 12, 2026

Removal/abandonment of existing water main, sanitary sewer, and storm sewer including. All pipes services, lateral, hydrant, valves, fittings and structures. All ditch grades, pipe sizes, pipe invert elevations (IE), and storm sewer structure RIMS/IE must be verified in field. The depth for new storm structures and nyloplast drain basin is approx., Locations of sanitary laterals shown on plans are schematic only and shall be verified in field during construction.

Village of Elkhart Lake

Close: Dec 4, 2025

Project consists of a new municipal building. The new Welcome Center is a 2,198 SF facility that will include a new visitor/tourist lobby area, a conference room, staff offices, staff toilet and break area, mechanical room and toilets for adjacent park use, accessed from the exterior and adjacent plaza to be used for public events. This is only a solicitation for flooring. The work includes providing approx. 200 SF of epoxy resin flooring and approx. 440 SF of epoxy terrazzo flooring work at the new Welcome Center. The work includes epoxy resin flooring at 2 exterior accessed toilet rooms and one exterior accessed storage room. The epoxy terrazzo flooring work will be located within the new lobby space and includes a terrazzo representation. BP 9.4A - Resinous Flooring.

Village of Elkhart Lake

Close: Dec 11, 2025

Public works facility. The 15,091 SF facility will include a new drive-through shop/storage area for Village public works vehicles, for both parking and repair, a vehicle wash bay, office area for Public Works support staff and a mezzanine space for additional Public Works storage. The Work includes a complete exterior architectural precast wall panel system around the full building exterior. The roof system consists of steel bar joists, metal roof deck, rigid insulation and fully adhered EPDM roofing system. Also included are aluminum storefront entrances, windows and glazed clerestories. Interior partitions at the office area will be gypsum board on metal stud framing and CMU load bearing partitions for shop area storage rooms below an upper level mezzanine. Finishes to include Solvent based oil, water and stain repellent sealer with penetrating Silane at shop area and vinyl luxury tile and acoustical tile ceilings throughout the office area. Painting work to include all walls throughout the facility and including high performance coatings throughout the shop area. Mechanical systems, plumbing systems, electrical systems and sitework are part of the project.