Description: Defense Logistics Agency (DLA) Weapons Support is requesting quotes for 18 trunnion drag brace units (NSN 1620-00-117-7274), along with a one-unit first-article-test line for material 0001S00000052. The solicitation requires delivery to Hill Air Force Base, Utah, FOB origin, with inspection and acceptance at origin. Quotes must be submitted through DIBBS by November 13, 2026.
Federal · VA, US
Original attachments and procurement documents tied to this bid.
Federal RFP files are for Starbridge customers only.
You can request RFP files from all other buyer types for free on this site.
Decision makers connected to this RFP from Defense Logistics Agency.
Adjacent opportunities open for bidding right now.
FederalAZ
Posted
Nov 5, 2026
Nov 23, 2026
Fence materials purchase - T-Post, (T-133) 5.5ft, w/ 4 clips/post ASTM Certified; Smooth Wire, 12.5 gauge, Class 1; Barbed Wire, 12.5 gauge, 2pt, 4 inch barb spacing, Class 1; Angle Iron Braces; Brace Angle Iron Post; Nuts & Bolts; Wire Stays, 36in, 9.5 gauge, Class 1 (100 stays per bundle).
CountyWA
Posted
Oct 29, 2026
Nov 19, 2026
Work includes removing portion of existing structure; 20 MBM timber and lumber - acza treated - superstr. ; 18 LF expansion joint modification - expansion end; 18 LF expansion joint modification - pinned end; 206 SY waterproof membrane; 1 LS cleaning and painting bridge; 10 LF sealing and caulking pack rust; 20 EA replace vacant/damaged rivet with hs bolt; 162 each replace gusset plate rivet with hs bolt; 1 cy conc. Class 4000 for wing wall; 100 lb st.reinf.bar for wing wall; 1 LS steel chord strengthening and repairs; 1 LF steel wind brace repairs; 210 SY removing existing overlay from bridge deck.
Posted
Oct 29, 2026
Nov 18, 2026
Provide hatch. Hatch no. 1-108-2 raised watertight quick acting hatch assembly, i/n: 14 of 167-7579188, material: aluminum and cres (astm-a-240, type-316l or type-316), clear opening size: 24" x 24", dogs: 4, coaming hight: 17"h, design pressure: 5 psi, type of gasket: a-a-59588 cl3b gr30 silicone (orange), brace (hand: r, cover open: 100 degree), hinge side: short side, hasp/staple: out (for hatch), operable: above & below (for hatch). Surface finish: powder coat haze gray except coaming (bare metal). 1 Assembly. See attached file.
CityBC
Posted
Nov 2, 2026
Nov 12, 2026
The Town of Smithers is inviting quotations from qualified Contractors to provide all labour and materials required to repair a damaged lintel located in the crawl space of the Visitor Information Centre (VIC) at 1411 Court Street, Smithers. A pre-bid site visit may be arranged by contacting: Morgan Widen, Building Inspector (250) 847-1600 mwiden@smithers.ca Quotations will be accepted until 2:00 p.m. on Thursday, November 12, 2026. Quotations will be accepted at the Town of Smithers Office, 1027 Aldous Street, Smithers, BC, or by mail to PO Box 879, Smithers, BC, V0J 2N0. Please submit quotations in a sealed envelope clearly marked: Visitor Information Centre Lintel Repair Contract #2026-07 C/O Morgan Widen, Building Inspector Submission Contents Quotations must include the following: 1. A completed Bid Form (Schedule "A" attached). 2. A copy of the Contractor's Safety Policy for the calendar year in which the work is to commence. 3. Bid security equal to 10% of the estimated price, provided as a certified cheque or letter of credit payable to the Town of Smithers. Purchasing Policy FIN-019 applies. The Town of Smithers reserves the right to waive informalities, to reject any or all quotations, or to accept the quotation deemed most advantageous to the Town. The lowest quotation will not necessarily be accepted. Existing Conditions • The Visitor Information Centre (VIC) is open to the public Monday to Friday, from 8:30 a.m. to 4:30 p.m. • The VIC is a single-storey, light wood-frame building, constructed circa the 1950s. • A Structural Assessment of the building was completed in December 2025. • The assessment identified a damaged concrete lintel, which provides support to the wood-frame floor system, requiring immediate repair (see attached VIC Structural Assessment). • The damaged concrete lintel is located within the VIC crawl space, accessible through an interior floor hatch. Scope of Work • All work must be fully completed by December 15, 2026. • The Contractor is responsible for ensuring a safe worksite at all times, with particular attention to the safety of both workers and the public. • Work is to be carried out outside regular office hours (regular office hours are 8:30 a.m. to 4:30 p.m., Monday to Friday). • The Contractor shall supply an Engineered Wood Product (EWP) lintel designed and stamped by a qualified professional for all applicable loads. • The Contractor shall install temporary supports to adequately brace the floor system, then remove the existing concrete lintel in a manner that creates an appropriate beam pocket for the new EWP lintel. • The Contractor shall install and secure the new EWP lintel, ensuring that it is separated from adjacent concrete surfaces with a suitable membrane. • Clear egress routes through the office must be maintained for staff and the public throughout the project. • The job site must be left clean, orderly, and free of debris at the end of each workday. Contractor Responsibilities • Submit a bid for the work as described in this Request for Quotation. • Coordinate and schedule all site activities with the Town of Smithers and Visitor Information Centre (VIC) staff. • Comply with the Town of Smithers General Conditions (attached). • Confirm receipt and understanding of the Contractor Coordination Program (CCP). • Provide proof of current Workers' Compensation coverage. • Provide a copy of the Contractor's Commercial General Liability Insurance, naming the Town of Smithers as Additional Insured. • Remove all waste materials and maintain a clean, orderly worksite at the end of each workday. • Complete all work no later than December 15, 2026. Town of Smithers Responsibilities • Provide the VIC Structural Assessment for Contractor reference. • Ensure the VIC building is prepared and accessible for work in the crawl space. • Coordinate communications and scheduling between the Contractor and VIC staff as needed. • Obtain and maintain a valid building permit for the scope of work. • Provide the required specification for the Engineered Wood Product (EWP) lintel. • Conduct construction inspections and approve any extra work, if required. • Participate in Tailgate Safety Meetings. • Process bid security and contract payments in accordance with Town procedures. • Review, manage, and file all contract documents. • Approve final completion of the contracted work. Safety Policy To be eligible to submit a quotation for Town of Smithers contracts, Contractors must include a copy of their written Safety Policy with their tender/quotation. A Safety Policy is considered valid for the calendar year in which the work is scheduled to commence. If a Contractor has previously submitted their Safety Policy to the Town, the Contractor may provide written notice confirming this in place of resubmitting the document. All bidders will be notified by phone regarding the results of the procurement. The successful bidder will receive a Notice of Acceptance, in accordance with the General Conditions. For any questions contact: Morgan Widen. Building Inspector (250) 847-1600 mwiden@smithers.ca Contact: Town of Smithers, 1027 Aldous Street, Box 879, Smithers, BC, V0J 2N0. Phone: 250-847-1600 Fax: 250-847-1601 Email: general@smithers.ca
