Description: The Texas Department of Transportation is soliciting bids for a mill-and-inlay highway maintenance contract in Midland County. The work is identified as being on IH 20, with an estimated cost of $1,540,044.50. Responses are due November 3, 2026, at 1:00 PM.
StateAgency · TX, US
Solicitation files and supporting documents for this bid.
RFP documents aren’t available here yet.
Our team can help you find the original solicitation documents.
Request File RetrievalAdjacent opportunities open for bidding right now.
Texas Department of Transportation
State AgencyTX
Posted
-
Nov 3, 2026
The Texas Department of Transportation is soliciting bids for a mill-and-inlay highway maintenance contract in Midland County. The work is identified as being on IH 20, with an estimated cost of $1,540,044.50. Responses are due November 3, 2026, at 1:00 PM.
Special DistrictOR
Posted
Oct 8, 2026
Nov 4, 2026
Reconstruct Taxiway K between Gates E3 and E6 with asphalt pavement and the vehicle service road from Gates D13 to E2 including: Provide centerline lighting cans, conduits, conductors, and pavement markings. Rehabilitate Taxiway K ramp between Gates E3 and E6 with asphalt mill and inlay including providing pavement markings.
CountyGA
Posted
Oct 16, 2026
Nov 17, 2026
Apron/stub taxiway rehabilitation project: the project includes the asphalt pavement rehabilitation of the apron and stub taxiway at county airport. The rehabilitation will consist of a mill and inlay over a portion of the stub taxiway and full depth reclamation on all other pavements in the work area. Additional items include erosion control, asphalt paving, minor grading, and pavement marking.
Special DistrictOR
Posted
Oct 15, 2026
Nov 12, 2026
Rehabilitate Runway 10L-28R (North Runway) and shoulders in asphalt concrete pavement with mill and inlay at Portland International Airport (PDX). Reconstruct portions of the North Runway north shoulder pavement and sealing of the blast pad pavements. Upgrade Runway 10L navigation aids (NAVAIDs) to Category II/III. Rehab pavement at Taxiways A1, A2, A3, A5, A6, K1, and T from the North Runway to the Runway 10L-28R hold bar, and widening of some existing shoulders. Construct Taxiway A4 in a new location and remove existing Taxiway A4 between the North Runway and Taxiway A. Provide runway and taxiway edge and centerline lighting cans, conduit, and conductors, as well as signage, electrical vaults, utility vault rehab, storm drainage, pavement markings, grading, and seeding includes 19,795 LF 2" PVC encased in concrete in new structural AC, 7,005 LF 2" PVC direct buried in grass or under new AC shoulder, 25 LF 2" GRSC in existing structural AC, 58 EA install PF taxiway centerline light on PF base can, PF extension, PF flange ring and CF transformer, 3,800 SY road stabilization fabric, 35 LF four 2" SCH 40 PVC concrete encased duct (under perimeter road), 2,6000 LF one 2" SCH 40 PVC concrete encased duct, 900 LF one 4" HDPE duct (PC), 18,000 LF two #8 AWG 5kV, L-824 conductor in conduit w/#6 AWG GND, 1 LS install ALSF shelter installation,
Decision makers connected to this RFP from Texas Department of Transportation.
