Design-Build Services for the Bridge of the Americas (BOTA) Land Port of Entry (LPOE) Modernization Project, El Paso, Texas

DESIGN-BUILD: Provide design-build construction services for the expansion of the BOTA LPOE. This project is for the design and construction of a new port of entry to replace the existing port. The current Land Port of Entry (LPOE) is a full-service port that inspects privately owned and commercial vehicles and pedestrians. It is currently operating from outdated, deteriorating facilities that do not adequately meet the functional needs of the tenant. The new construction project will correct port deficiencies and modernize its facility to accommodate the increasing traffic. The current LPOE will be required to stay in continuous operation during the construction; the contractor will be required to phase the construction. At the start of construction, commercial traffic will be permanently redirected to nearby LPOEs. The project construction components include but not limited to construction of an administration building to include an expanded pedestrian inspection area; primary and secondary passenger vehicle inspection facilities; outside vehicle parking expansion; seized vehicle processing area; a kennel; canopies, outbound inspection for pedestrian and privately owned vehicles and buses, outbound support office building and new paving throughout the LPOE. The project will also include bus inspection facilities for the Federal Motor Carrier Safety Administration (FMCSA), including a canopy and building for FMCSA staff. This project is subject to Design Excellence and Construction Excellence Procedures. The design-build scope of work includes all management, supervision, labor, equipment and materials required to provide architectural, engineering, construction, and other related services necessary to design and construct the new facilities as well as demolish the existing facilities including abatement. Related services include, but are not limited to, site planning, utility relocation (as needed), testing and inspection during construction, commissioning, and potential additional analysis of the site.