Description: Argonne National Laboratory seeks a supplier to design, fabricate, deliver, support installation, and commission a custom industrial furnace for research and development testing of fuel-flexible burners using natural gas and hydrogen blends. The furnace must support both direct-fired and indirect-fired burner configurations and comply with the performance, facility-interface, code, and safety requirements in the Statement of Work. Award will be made on a best-value basis, with the technical proposal more important than the price and business management proposals.
Federal · DC, US
Adjacent opportunities open for bidding right now.
Posted
Oct 29, 2026
Dec 1, 2026
Provide supplier to design, fabricate, deliver, support installation, and commission a custom industrial furnace for R&D testing of fuel-flexible burners using natural gas and hydrogen blends from 0–100% H₂. See attached file.
Posted
Nov 11, 2026
Nov 16, 2026
Provide 1 EA Optical Floating Zone Furnace.
FederalMD
Posted
Oct 28, 2026
Nov 28, 2026
Graphite furnace atomic absorption spectrometer.
Posted
Nov 5, 2026
Nov 16, 2026
High-temperature furnaces must be operational up to 2600 °C.; High-temperature furnaces must have disposable retorts with a central gas outlet with gas guides.; High-temperature furnaces must have a water-cooled vacuum vessel that is under 60 °C even if the unit is running at 2600°C.; High-temperature furnaces must be able to operate under vacuum pressure to at least 2200 °C.; High-temperature furnaces must have redundant pressure relief values for safety. ; High-temperature furnaces must have optimized vacuum systems. Pumps must be controlled through a PLC with vacuum levels data logged and automatic on/off control.; High-temperature furnaces must have a programable limiter to ensure powder or small samples are not disturbed during evacuation. For example, 1000 mbar down to 700 mbar with a pumping speed increasing linearly from 20% to 30%, 700 mbar down to 40 mbar with a pumping speed increasing linearly from 30% to 40%, and 40 mbar down to 1 mbar with a pumping speed increasing linearly from 40% to 100%. ; High-temperature furnaces must have factory-configured and PID terms installed.; High-temperature furnaces must have fully automatic control from program start to end. See attached file.
Decision makers connected to this RFP from Department of Energy.
Original attachments and procurement documents tied to this bid.
Federal RFP files are for Starbridge customers only.
You can request RFP files from all other buyer types for free on this site.
