Construction of Water Well No. 5 Rework for Langham Creek Utility District

Construction of a culinary water production well to serve as a backup well.

The Naval Research Laboratory issued a Sources Sought notice seeking potential sources capable of performing demolition and construction of a drinking water well at the POMONKEY Site in La Plata, MD. This is a market-research Sources Sought (not a solicitation or grant) to gauge industry interest and capabilities for an SBA 8(a) follow-on requirement; a draft Statement of Work is referenced. Responses (maximum 5 pages, Word or PDF) are due by Dec 25, 2025 and should be emailed to the Contract Specialist listed on the SAM.gov posting.

Well #4 and Well #5 Electrical and Water System Improvement project includes various electrical, mechanical, HVAC, SCADA and site improvements to the existing Well #4 and Well #5 stations. Improvements include the following: selective demolition, furnish and install existing motor control centers, appropriate surge protection, step-down transformers, 120/208V panelboards, and install new 100hp variable frequency drives; replace existing interior and exterior lighting; upgrade of existing SCADA panels; furnish and install all necessary piping to connect new pump control valve, painting of all process piping; furnish and install new electrical unit heaters, exhaust fans, and louver actuators; existing driveway replacement for well #5, construction of a permanent foundation for the existing well 5 generator, well #5 generator modification and installation on permanent foundation, perimeter fencing removal and replacement, and new sliding access gates; and replacement of the existing acoustical panel ceilings. The project includes the installation of a new 300hp variable frequency drive and furnish and install motor replacement of the existing Well #2.

Provide all necessary labor, equipment, parts and supplies to: Demolition / Decommission: Decommission old well as required by Maryland state regulations, to include filling of old well with dry bentonite and properly cap or seals as per local state requirements. Prepare Water Well Abandonment-Sealing Report. Remove existing pump, pressure tanks, associated pipe connection and any device related to the existing well operation. Properly dispose any material. Remove electrical connection back to point of connection. Existing well cannot be demolish and disconnected from the water distribution system until the new well is ready to be connected to the existing water distribution. See attached file.