Well Pump and Booster Pump Maintenance Inspection

(7) well pumps and (6) booster pumps maintenance and inspection: 1. Flow test each well for a maximum of one hour using flow meter of calibrated orifice 2. Flow test each booster pump for a maximum of one-half hour directly into the system 3. Record static and pumping water levels in the well during the test. 4. Record appropriate discharge pressures during the test. 5. Calculate the specific capacity of the well. 6. Plot performance to determine current operating conditions versus design conditions or previous maintenance inspections. 7. Record amperage and meggar test electric motors where applicable. 8. Record vibration magnitudes on the motor while running. 9. Change oil and re-grease motors as required. 10. Inspect packing and add if necessary 11. Inspect all other applicable equipment within the well house to determine if any addition repairs are needed. 12. Provide a written report containing all the test data and results. Reviewed by a professional engineer. 13. Provide a complete list of recommended repairs.