.svg){kind=small}
Discover opportunities months before the RFP drops
Learn more →Discover opportunities months before the RFP drops
Learn more →Retrieving RFP details
Starbridge can help you:
Pain points mentioned in board meetings and strategic plans
Instantly outline and draft all requirements
Bring in your USPs and exploit competitor gaps
Starbridge can help you:
Get ahead of RFPs — target accounts planning budget or ending contracts soon
Accounts with contract expirations, meetings mentioning your product, grants, budget changes and more
Starbridge.ai books 30 - 40% of leads into meetings
Premium
Access the largest public sector contact database
Premium
Get complete source documentation & analysis
The work for which bids are asked includes the following: The structure is a 200,000-GAL spheroid elevated water storage tank with a high-water level of 125 ft. 9 in. Exterior: High pressure water clean (5,000 to 10,000 psi) and spot power tool clean to a SSPC-SP11 standard. Apply a three (3) coat epoxy urethane fluoropolymer system. Wet Interior: Abrasive blast clean to a SSPC-SP10 near-white metal stan dard. Apply a three (3) coat zinc epoxy system. Dry Interior: Abrasive blast clean the entire tops of the platforms (including 1 ft. up the riser wall), the entire transition cone, and spot coating failures throughout to a SSPC-SP6 commercial standard. Apply a three (3) coat epoxy system to the transition cone and a spot two (2) coat epoxy system to the rest of the prepared surfaces. Foundation: Water clean and apply a two (2) coat epoxy system. Cathodic Protection: Replace the wet interior components and attachment points of the system.
Starbridge can help you:
Pain points mentioned in board meetings and strategic plans
Instantly outline and draft all requirements
Bring in your USPs and exploit competitor gaps
Starbridge can help you:
Get ahead of RFPs — target accounts planning budget or ending contracts soon
Accounts with contract expirations, meetings mentioning your product, grants, budget changes and more
Starbridge.ai books 30 - 40% of leads into meetings
No files attached to this RFP.
Many agencies add documentation later or require FOIA requests. Starbridge can automatically retrieve these files for you.
Work includes: Exterior: High pressure water clean (5,000 to 10,000 psi) and spot power tool clean to a SSPC-SP11 standard. Apply a three (3) coat epoxy urethane system.\r \r Dry Interior: Abrasive blast clean the entire tops of the platforms (including 1 ft. up the riser wall), the entire bowl, the entire access tube, and spot coating failures throughout to a SSPC-SP6 commercial standard. Apply a three (3) coat epoxy system to the access tube and bowl and a spot two (2) coat epoxy system to the rest of the prepared surfaces.\r \r Foundation: Repair grout, repair cracks, repair spalls. Water clean and apply a two (2) coat epoxy system.\r \r Cathodic Protection: Install an impressed current cathodic protection system.\r \r Repairs:\r 1)Install a gasket on the wet interior roof hatch.\r 2)Install handholds at the roof hatches.\r 3)Install ladder extension at the condensate platform.\r 4)Install a sample tap on the fill/draw pipe.\r 5)Install a chemical feed tap on the fill/draw pipe.\r 6)Replace the expansion joint.\r 7)Install an aluminum jacketing over the fill/draw pipe insulation in the riser.\r 8)Replace the mud valve.\r 9)Overflow discharge modification.\r 10)Weld a rigging lug on the bowl.\r 11)Replace the dry interior light bulbs.
Posted Date
Dec 5, 2025
Due Date
Jan 6, 2026
Release: Dec 5, 2025
Close: Jan 6, 2026
Work includes: Exterior: High pressure water clean (5,000 to 10,000 psi) and spot power tool clean to a SSPC-SP11 standard. Apply a three (3) coat epoxy urethane system.\r \r Dry Interior: Abrasive blast clean the entire tops of the platforms (including 1 ft. up the riser wall), the entire bowl, the entire access tube, and spot coating failures throughout to a SSPC-SP6 commercial standard. Apply a three (3) coat epoxy system to the access tube and bowl and a spot two (2) coat epoxy system to the rest of the prepared surfaces.\r \r Foundation: Repair grout, repair cracks, repair spalls. Water clean and apply a two (2) coat epoxy system.\r \r Cathodic Protection: Install an impressed current cathodic protection system.\r \r Repairs:\r 1)Install a gasket on the wet interior roof hatch.\r 2)Install handholds at the roof hatches.\r 3)Install ladder extension at the condensate platform.\r 4)Install a sample tap on the fill/draw pipe.\r 5)Install a chemical feed tap on the fill/draw pipe.\r 6)Replace the expansion joint.\r 7)Install an aluminum jacketing over the fill/draw pipe insulation in the riser.\r 8)Replace the mud valve.\r 9)Overflow discharge modification.\r 10)Weld a rigging lug on the bowl.\r 11)Replace the dry interior light bulbs.
AvailableThe City of Santa Ana (Public Works Agency) issued Invitation for Bid Project 26-6012 for the 'Willits Street, Elder Avenue, and Center Street Traffic Calming' project to install asphalt speed hump cushions, thermoplastic legends, new signs and poles, and to remove existing striping and repair damaged pavement. Bids must be submitted electronically via the PlanetBids portal, though original hard copies of certain notarized documents and the bid bond are required for verification. The bid was posted 2025-12-16, questions are due by 2026-01-06, and the bid closing is 2026-01-13 at 2:00 PM PST.
Posted Date
Dec 17, 2025
Due Date
Jan 13, 2026
Release: Dec 17, 2025
Close: Jan 13, 2026
The City of Santa Ana (Public Works Agency) issued Invitation for Bid Project 26-6012 for the 'Willits Street, Elder Avenue, and Center Street Traffic Calming' project to install asphalt speed hump cushions, thermoplastic legends, new signs and poles, and to remove existing striping and repair damaged pavement. Bids must be submitted electronically via the PlanetBids portal, though original hard copies of certain notarized documents and the bid bond are required for verification. The bid was posted 2025-12-16, questions are due by 2026-01-06, and the bid closing is 2026-01-13 at 2:00 PM PST.
The City of Santa Ana (Public Works Agency) issued Invitation for Bid Project 26-6012 for the 'Willits Street, Elder Avenue, and Center Street Traffic Calming' project to install asphalt speed hump cushions, thermoplastic legends, new signs and poles, and to remove existing striping and repair damaged pavement. Bids must be submitted electronically via the PlanetBids portal, though original hard copies of certain notarized documents and the bid bond are required for verification. The bid was posted 2025-12-16, questions are due by 2026-01-06, and the bid closing is 2026-01-13 at 2:00 PM PST.
Posted Date
Dec 17, 2025
Due Date
Jan 13, 2026
Release: Dec 17, 2025
Close: Jan 13, 2026
The City of Santa Ana (Public Works Agency) issued Invitation for Bid Project 26-6012 for the 'Willits Street, Elder Avenue, and Center Street Traffic Calming' project to install asphalt speed hump cushions, thermoplastic legends, new signs and poles, and to remove existing striping and repair damaged pavement. Bids must be submitted electronically via the PlanetBids portal, though original hard copies of certain notarized documents and the bid bond are required for verification. The bid was posted 2025-12-16, questions are due by 2026-01-06, and the bid closing is 2026-01-13 at 2:00 PM PST.
Improvements to the parking lot at the 12th Street Community Center will include site preparation, paving, drainage enhancements, and potential landscaping to enhance accessibility and functionality.
Posted Date
Dec 17, 2025
Due Date
Jan 21, 2026
Release: Dec 17, 2025
Close: Jan 21, 2026
Improvements to the parking lot at the 12th Street Community Center will include site preparation, paving, drainage enhancements, and potential landscaping to enhance accessibility and functionality.
AvailableSurface intent from meeting minutes, budgets, and contract expirations. Influence RFP requirements before competitors ever see them.
See your top 10 upcoming opportunities on a demo →Premium
Access the largest public sector contact database
Premium
Get complete source documentation & analysis