Pavement Rehabilitation and Electrical Replacement Project - Prosser Airport

Work includes: -Repair existing cracks on all runway, taxiway, taxilane, and apron pavement. -Apply slurry seal to all runway, taxiway, taxilane, and apron pavement. -Restore pavement markings impacted by slurry seal. -Replace Runway 8-26 existing medium intensity edge lights (MIRLs) with new LED fixtures and system. -Replace all existing taxiway edge reflectors on Taxiway A and the connector taxiways. -Replace all existing Runway 8-26 related signage with LED fixtures and system. -Replace Runway 8 PAPI (Port owned) with LED fixtures and system. -Replace Runway 26 PAPI (Port owned) with LED fixtures and system. -Replace Runway 8 REIL (Port owned) with LED fixtures and system. -Replace Runway 26 REIL (Port owned) with LED fixtures and system. -Replace the lighted primary wind cone with LED fixtures. It is assumed that the segmented circle will not be impacted as a part of this project. -Replace the existing non-lighted supplemental wind cone with a lighted LED fixture. -Replace and modify the existing electrical room vault, including new regulator, panel board, disconnect switch, radio control unit and associated antenna, and various other components. See outside link.